1.
Remove the silicone mould from the cup and
plastic tray
2.
Clean the mould with alcohol and a cotton
pad/baby bud to get the fine details
3.
Use the ratio 1 baldiez: 2 alcohol and measure
out
4.
Once the silicone mould is clean spray with
petrolease, make sure you wear a protective mask and do this by a window or
outside.
5.
Then apply 2/3 layers of the 1:2 ratio with a
brush to mould making sure to get into all the crevices, cool with a hair dryer
(on cool setting)
No comments:
Post a Comment